en
ProductsPlasma cutting
TransCut
 |
Zoom
close
TransCut is a plasma cutting device which does not, as is usual, use compressed air, but rather, a small amount of liquid. This liquid serves as a medium for the high-energy plasma beam, and makes the device lightweight and portable. A 230 V connection or a generator suffice as a power supply. The compact cutting device can be taken anywhere at any time, and is ready for use within a very short time.
Cutting with TransCut means “green cutting”. Toxic emissions are greatly reduced, by up to 90 %! This considerably improves the working environment. At the same time, Trans Cut reduces metal sparks and contamination of components. The cutting system cuts steel, chrome/nickel and aluminium. High quality cuts of up to 6 mm are possible.
Base metals
Structural steels, Cr/Ni steels, aluminium
Fields of use
Air conditioning and ventilation systems, vehicle panel-beating/bodywork, construction of industrial plant and pipework, maintenance/repair
Technical Data
| Single phase mains voltage | 230 V |
| Mains voltage tolerance | + 10 % / - 15 % |
| Mains fuse protection (slow-blow) | 16 A |
| Cos phi | 0.99 |
| Cutting current range | 16 – 30 A |
| Duty cycle at 10 min/40° C (104° F) | 35% d.c. at 30 A |
| Duty cycle at 10 min/40° C (104° F) | 100% d.c. at 18 A |
| Length of operation per tank | 3 h |
| Protection | IP 23 |
| Dimensions l/w/h mm | 460/180/275 |
| Dimensions l/w/h inches | 18.11/7.09/10.83 |
| Weight (with plasma cutting torch) in kg | 14,6 |
| Weight (with plasma cutting torch) in lb | 32.19 |
| Marks of conformity | CE |
| Safety | S |
Equipment features
Standard equipment
- Generator-compatible
- Energy-saving inverter technology
- Contact ignition
- Regenerative torch cooling system
- Closed-circuit fluid system
- Test button for fluid system
- Filling level sensor for working medium
- Temperature-controlled fan
- Overtemperature protection
- Carrying strap
Options
- Guide set